Friday, July 19, 2024

R&S “Value Instruments” May Make a Big Difference

Parent Category: 2019 HFE

By Tom Perkins, Senior Technical Editor

RF and microwave laboratories face common challenges in these times. They include shrinking timelines for acquisition of accurate test results and leaner financial budgets. Formidable present-day laboratory challenges include integrating radios with embedded designs which add a new twist. New EMI challenges abound. Specific protocol events need to be triggered upon, and result tables exported for further analysis or documentation.

Low speed serial bus data can be captured with oscilloscopes, and with analysis software, can be decoded and validated. Also, obtaining high fidelity bench power is a necessity. Power rail tolerances are getting tighter and more difficult to measure. There are many power rails in designs for devices such as CMOS amplifiers, Application Specific Integrated Circuits (ASICs) and DRAMS with voltages such as -5, +1.2, +3.3, +5 and sometimes higher for devices such as GaN amplifiers. Sleep and wake modes are critical for proper control of circuitry.

Recently Rohde & Schwarz, generally known for high quality but expensive test instruments, showcased a new generation of Value Instruments for High Frequency Electronics. The take-way was that a great amount of capability is packed into smartly designed instrument cases weighing approximately 10 pounds which will revolutionize electronics hands-on in education institutions, research and development facilities, small business production laboratories and even hobbyist benches. These types of instrument products, not all unique to R&S, are creating a new paradigm in lab measurements. The units demonstrated are so compact and lightweight that if handed to someone wearing a blindfold, they might think it is a shoebox, or upon feeling the controls, that it is only a mock-up instrument. Certainly not your father’s or grandfather’s rack or rolling wheeled cart mounted equipment.

In this case the supplier introduced “a portfolio of entry-level to mid-range value instruments, promoting five key technologies.” Included are more than 100 products and 300 accessories including oscilloscopes, spectrum analyzers, precision power supplies, and signal generators. (See Figure 1).

1901 Test fg01

Figure 1 • Family of Value Instruments.

Designed with the high quality and precision that users have come to expect of Rohde & Schwarz, the new value instruments are manufactured at the same European plants as the company’s higher-end products. With more than eight decades of experience and renowned German engineering, the company’s value instruments provide the performance needed for measurement tasks in everyday laboratory operations at universities and research and development facilities.

“At Rohde & Schwarz, we pride ourselves on our high-quality, German engineering that customers have come to expect for the last 85 years,” said Bob Bluhm, R&S vice president of value instruments. “With the introduction of our value instruments line, we’ve challenged our high-end RF engineers to deliver that same level of quality, capability and performance to this market place. They did not let us down. Just ask an engineer who owns one; these products provide outstanding features at a much lower price.”

Value Instrument Oscilloscopes

Oscilloscopes were originally called oscillographs. Digital displays and added capabilities may eventually be a catalyst for name change again. Modern value-class oscilloscopes go far beyond the features of a traditional oscilloscope; these instruments include a logic analyzer, protocol analyzer, waveform and pattern generator and voltmeter in the same instrument. For example, featuring the power of 10, these value instrument oscilloscopes include a class exclusive 10-bit analog-to-digital converter (A/D converter), 10s of Msamples of memory and a 10.1-inch touchscreen offering the highest resolution in its class: 1280x800 pixel. The technology’s 10-bit A/D converter provides sharper waveforms and more signal details, compared to conventional 8-bit A/D converters, yielding up to four-fold improvement.

1901 Test fg02

Figure 2 • Value Oscilloscope Live Demonstration.

Users desire features such as lower cost with more performance, large touchscreen displays, and more vertical resolution. The RTB2000 oscilloscope (see Figures 2 and 3) features a 10.1-inch capacitive touchscreen that allows users to quickly navigate pop-up menus and adjust scaling by zooming in or moving a waveform. A memory depth of 10 Msample is available on every channel if all channels are active, or users can benefit from 20 Msample when channels are interleaved. Ten times more memory than comparable oscilloscopes is offered, allowing users to capture longer signal sequences for more analysis results. The oscilloscope features a frequency range of 70 to 300 MHz. Utilizing state-of-the-art A/D converters and low-noise frontends, the oscilloscope can precisely measure very small vertical resolution. Combining the product’s smart operating concepts with the power of 10 makes it the ideal tool for troubleshooting embedded designs during development, or for use in settings such as university laboratories, production and service departments.

Stepping up, the RTM3000 oscilloscope offers a greater frequency range of 100 MHz to 1 GHz. The oscilloscope features a custom 10-bit A/D converter to deliver four-fold improvement over conventional 8-bit A/D converters, providing users with sharper waveforms and more signal details. As with the RTB2000, the RTM3000 features a 10.1-inch capacitive touchscreen in compact form. This is the largest capacitive display with the highest resolution (1290 x 800 pixel) in its class.

Higher End Value Oscilloscopes

Designed with class-leading signal integrity and responsive ultra-deep memory, the RTA4000 oscilloscope brings the power of 10 to a new level. The R&S®RTA4000 is specifically designed to address signal integrity, helping users avoid compromising measurement accuracy for an affordable instrument. Compared to other oscilloscopes in its class, it includes standard ultra-deep memory, 100 Msample per channel, or 200 Msample in an interleaved mode, and a fast update rate. The product’s class-leading low noise allows users to maximize use of the resolution available, ultimately revealing signals that may be hidden in the noise of other oscilloscopes. This high-resolution decimation allows it to provide up to 16-bit vertical resolution, a resolution previously unseen in a value class instrument. Starting at about $6,000 USD, it also features a frequency range of 200 MHz to 1 GHz, sensitivity down to 500 µV/division and class-leading time-based accuracy of ±0.5 ppm to ensure accurate measurements over long time periods. It is ideal for applications ranging from EMI debugging to power integrity and power analysis, the RTA4000 adapts to project updates as needed to best grow with user needs

1901 Test fg03

Figure 3 • Value Instruments in College Laboratory.

Value Instrument Spectrum Analyzer

HFE personnel were next introduced to the FBC1500 Spectrum Analyzer (See Figure 4). This unit had a vertical antenna attached to an input port and of course noticeable signals appeared to be local cellular activity, as expected. Local 4G LTE activity can be seen below 800 MHz as well as perhaps traditional cellular signals closer to 900 MHz.

Speaking of value, some entry-level spectrum analyzers costing less than $3,000 are the only ones on the market with the value and capabilities of a three-in-one instrument – a spectrum analyzer, vector network analyzer and a signal generator. Featuring a frequency range of 5 kHz to 1 GHz, the FPC1500 (see Figure 5) can be upgraded to 2 GHz or 3 GHz high end frequency limit. It has a low noise floor, -165 dBm (typical with a preamplifier). In addition to being able to measure RF signals up to 1-watt (+30 dBm), it is also an RF signal generator and features a tracking generator and an independent continuous wave (CW) signal generator.

1901 Test fg04

Figure 4 • Live Demonstration of Value Spectrum Analyzer with Whip Antenna Receiving Over the Air Signals.

It also includes a one-port vector network analyzer with a Smith Chart display, a signal generator, internal voltage standing wave ratio (VSWR) bridge, independent signal source and resolution bandwidth settings down to 1 Hz. It includes a 10.1-inch Wide XGA/WXGA (1366 x 768 pixel) display, is Wi-Fi-enabled and includes a remote-control capability. It is compatible with iOS, Android and PCs and features a low noise floor and high maximum input power. Data can be stored to these devices and then saved, stored, and if desired, sent to a printer.

1901 Test fg05

Figure 5 • Value Instrument Spectrum Analyzer.

Power Supplies

As the only power supply on the market featuring four channels, while obviously not the solution for everybody, the R&S®HMP4040 power supply (Figure 6) offers a maximum voltage of 128 V and maximum current of 40 A, up to 10 A output current per channel. Up to 160 watts of channel power can be had, and unlike other power supplies available on the market, the product offers identical voltage range on all channels. It comes standard with a dual USB/LAN interface and locates all basic functions on the front panel to allow for direct access.

1901 Test fg06

Figure 6 • 4 Channel Programmable Power Supply.

Offering high efficiency and low residual ripple, the product includes a wide variety of protection features to prevent damage to the instrument and the device under test (DUT), such as overtemperature, overload and short-circuit protection. Sleep and wake modes are critical and can be managed from a coordinated Wi-Fi interface. We noted that due to the ability to make voltage additive, applications like electroplating and powering GaN high power amplifiers are quite feasible.

Value Instrument Signal Generator

Another interesting product is the signal generator, such as the model SMC100A shown in Figure 7. Here, the manufacturer claims that the “graphical interface allows you to set up the signal the way you think about it.” It mimics the functional blocks of a transmitter. Functional highlights are: output frequencies of 9 kHz to 1.1 GHz or 3.2 GHz, output power up to 50 milliwatts, low phase noise typically -111 dBc, AM/FM/phase/pulse modulation, optional reference oscillator, optimized level accuracy, USB and LAN, and optional GPIB. This is a very useful tool particularly for classroom training purposes and circuit design work.

1901 Test fg07

Figure 7 •  Value Instrument Signal Generator.

Customer/User Education and Support

Rohde recognizes that these instruments can be of much more value to the user with competent customer support and their goal is to promote features with minimal asterisks or exceptions to specifications. They maintain close links with leading research centers and University departments in the mobile communications, RF and microwave fields. They offer discounted equipment packages to schools to assist in quantity buys for equipping teaching laboratories. This could help make our field more visible and appealing to students as mentioned in our January 2019 Editorial. They also provide multiple formats for easy access technical support,

Other Suppliers and Conclusion

It is perceived that there is a large, untapped market for value instruments like the ones previously described. There are other specific instruments useful in RF labs such as those made by competing companies or in some cases, complimenting ones such as low-cost network analyzers and power meters that certainly deserve mention.

Since the equipment described in this article is principally not “vendor neutral” (a play on words!) we mention other companies like Anritsu, Copper Mountain, Fluke Corporation, Keysight, LadyBug Technologies, Mini-Circuits, National Instruments and Tektronix. Some of these companies provide cost effective instruments that rely on computers such as ordinary laptops for fulfillment of functionality. That saves capital expenses. Worthy of note, Tektronix reports to have sold more than 1 million oscilloscopes based on their TDS2 platform, the latest being the TBS 2000 series (Figure 8).

1901 Test fg08

Figure 8. Tektronix TBS 2000 Series Digital Oscilloscope.

It should be noted that not all these companies are on the same “playing field,” but certainly deserve consideration when weighing test equipment needs such as their application, ease of use, durability and cost. This value instrument trend will no doubt grow and flourish going forward.

HFE’s thanks to Rich Markley, Distribution Product Manager for Rohde & Schwarz USA and Erica Harbison of Blu Print Public Relations for their December briefing.

Current Issue

2024 07 HFE cover

The July 2024 Online Edition is now available for viewing and download!

View Current HFE